>
CrossHelmet is a flagship 360° A helmet with field of view and touch noise reduction function, which is connected to the mobile phone via Bluetooth, supports navigation, media, call and call functions, and displays information such as time, power, and forward direction. Regrettably, it seems that it does not force the display of GPS speed. Fortunately, its active noise reduction system is relatively powerful and can filter out road, engine and wind noise, and users can adjust the noise reduction level according to actual needs.CorssHelmet has built-in 360° camera, noise reduction, and touch module
CrossHelmet is equipped with thick touch areas on both sides. After pairing with an Android or Apple smartphone, it can respond to operations such as touch, slide, and volume adjustment.
“Head up display”(HUD)Function diagram
It should be pointed out that because it is a capacitive touch panel, ordinary gloves cannot directly interact with it.
CrossHelmet''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s mask is very wide
For extra safety, CrossHelmet has integrated an LED safety indicator belt on the helmet shell. It is said that the battery life is 6-8 hours.
CrossHelmet considered a huge facial space when designing
CrossHelmet is not lightweight, because it weighs 1.78 kilometres catty (3.92 lb), But still lighter than Schuberth C4.
>CrossHelmet''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s chin is long and thin, and the audio and video, camera and battery modules are all installed inside.
The following is a test chart
After trial and error, X-1 was finally brought.
The appearance has great changes on the front/side, and it is futuristic from any direction. They are also considering plans to develop related peripherals. The X-1 is equipped with a rear camera and a central HUD(Head-up display)Projecting information such as rear images and navigation on the X-1, the integrated design of the X-1 considers design, adjustment, and maintainability.
You can clearly see the rear camera, when you want to get rear information without being blocked, so it looks like a car''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s rearview mirror. Noise will appear on the screen 20 minutes after starting the device. The manufacturer stated that because the CPU gradually heats up when the helmet is disabled, it can be solved by air cooling during riding.
[Analysis of the function of each component]
[1] CPU: Built-in motherboard, used to control video, Bluetooth connection with smartphones and intercom function on the back of the head.
[2] Rear-view camera: equipped with a wide-angle 170-degree camera, because there are many blind spots on the rear-view mirror of the motorcycle, and can reduce eye movement.
[3] HUD: The image is projected on the screen, and the image appears to float in the field of view. At present, the HUD can run for about 4 and a half hours after being fully charged.
[4] Air duct: The left and right air ducts that introduce wind can also reduce the stuffiness of the head and cool the main board. Although there is no on/off mechanism, it has a waterproof performance equivalent to IPx5, and it can also be used for light rain.
[5] Speaker: Built-in high output speaker.
HUD(Head-up display)The displayed content comes from the image of the rear-view camera and the navigation information linked to the smartphone.
(Left)Install the power port on the right side of the bottom and charge with USB(Type C),(right)The speaker is a type that wraps the ear like a high-end earphone, and the sound is very clear.
CROSS HELMET X-1 function demonstration>First turn on the switch
When the power switch under the cover is pressed, the built-in LED in the base lights up, and the weight of the cover is the same as that of a normal system pad, and there is no discomfort. The cheek pads integrated with the speakers of the surround speakers are a wearing feature.
Adjust the screen angle
After 20 seconds, the image of the rear camera will be displayed on the HUD, and the device can be moved(Black box part)To adjust the angle for easy viewing. The image is very clear.
Connect with smartphone app
Use free dedicated apps(Compatible with iOS and Android)Link your smartphone to X-1, equipped with navigation and group discussion functions.
Touch and operate the shield base
The left shield base is a touch panel, you can click and play music, etc., and then slide up or down to control the volume, which is a unique feature of integrated development.
Also shows the distance to the arrow and branch
In addition to the back image, it also displays navigation information linked to the smartphone, showing the distance to the arrow and branch point, weather, battery status, etc. In the demonstration video, even in the tunnel and at night, the image from the rear camera can be projected well.
CROSS HELMET X-1 smart helmet, field test